Servicing

 

In addition to our primary manufacture and installation products and services we also offer numerous extras and a comprehensive ongoing servicing contract.

We also welcome your call to discuss any services not listed; we take pride in delivering for our clients whatever their request and believe that our after sales is amongst the best in the business.

Additional services include: Site Inspections / Surveys Cleaning / Servicing On site maintenance Rectification work Commissioning Grease traps Drain Surveys Pipework and accessories High / Low Level Alarm systems Access covers and frames All other associated ancilliaries

 

Servicing

To ensure the longevity and efficiency of your sewage and water pumping stations we recommend our ongoing servicing agreement, which includes;

• Hose or jet-wash the sump-internals/pumps
• Breakdown and remove crust from surface of water within sump
• Check pumps for any blockages and remove same
• Check for free rotation of impellers/visually check condition of same
• Audibly check motor bearings for noise
• Check condition of motor oil
• Strip *volutes to expose impellers & seals
• Inspect condition of mechanical seals
  *Replenish motor oil as required.
• Clean and inspect condition of neoprene cabling and glands on pumps and floatswitches
• Remove inspection covers on non-return valves, check and remove any blockages
• Check for correct seating of flaps/sealing, lubricate and refit covers
  *Rotate and lubricate isolation valves to ensure correct operation
• Inspect and note any corrosion to pipework/valves within sump
• Lift float switches and check correct auto sequence
• Carry out ‘megger’ test (insulation resistance test) to motor windings noting any low readings
• Check any electrical junctions/boxes/connectors. Dry out and re-make/re-seal (as required)
• Carry out clamp-meter tests noting correct running current of pump motors
  *Open control-panel and check for correct movement of motor starter contacts
  Inspect and note wear to same.
  *Check all panel bulbs and audible sounders. Report any replacements required
  *Check discharge stools, guide rails and upper support brackets noting any corrosion
• Check pump lifting chains, shackles and hooks noting and corrosion.
• General condition; check and report upon the general condition of sump and access opening

* Where applicable