Additional Services
In addition to our primary manufacture and installation products and services we also offer numerous extras and a comprehensive ongoing servicing contract.We also welcome your call to discuss any services not listed; we take pride in delivering for our clients whatever their request and believe that our after sales is amongst the best in the business.
Additional services include:- Site Inspections / Surveys
- Cleaning / Servicing
- On site maintenance
- Rectification work
- Commissioning
- Grease traps
- Drain Surveys
- Pipework and accessories
- High / Low Level Alarm systems
- Access covers and frames
- All other associated ancillaries
Servicing
To ensure the longevity and efficiency of your sewage and water pumping stations we recommend our ongoing servicing agreement, which includes;
- Hose or jet-wash the sump-internals/pumps
- Breakdown and remove crust from surface of water within sump
- Check pumps for any blockages and remove same
- Check for free rotation of impellers/visually check condition of same
- Audibly check motor bearings for noise
- Check condition of motor oil
- Strip volutes to expose impellers & seals ¹
- Inspect condition of mechanical seals
- Replenish motor oil as required ¹
- Clean and inspect condition of neoprene cabling and glands on pumps and float switches
- Remove inspection covers on non-return valves, check and remove any blockages
- Check for correct seating of flaps/sealing, lubricate and refit covers
- Rotate and lubricate isolation valves to ensure correct operation
- Inspect and note any corrosion to pipework/valves within sump
- Lift float switches and check correct auto sequence
- Carry out 'megger' test (insulation resistance test) to motor windings noting any low readings
- Check any electrical junctions/boxes/connectors. Dry out and re-make/re-seal (as required)
- Carry out clamp-meter tests noting correct running current of pump motors
- Open control-panel and check for correct movement of motor starter contacts ¹
- Inspect and note wear to same.
- Check all panel bulbs and audible sounders. Report any replacements required ¹
- Check discharge stools, guide rails and upper support brackets noting any corrosion ¹
- Check pump lifting chains, shackles and hooks noting and corrosion.
- General condition; check and report upon the general condition of sump and access opening
¹ Where applicable